******************* STEP BY STEP PROCEDURE FOR ZTE MF927U WIFI ROUTER UNLOCK ********************
NOTE: [ I am Not Responsible if anything happens to your device, so please do this with prior Knowledge.]
YouTube video
*********
1). Download The Files & Extract to PC Some where.
2). Turn On The Device & Install the Driver Files from the Folder.
3). Connect Device Over USB & then Run SCSI.exe App to open ports & Verify that AT Interface(COMXX) & LOG Interface(COMXX)
are Available in Device Manger Under [Ports(COM&LPT): Section].
4). Run 'JAZZ MF927U BY GM SOLUTIONS.exe' & Copy HW_ID-Key "DONT CLOSE WINDOW"
5). Run 'KEYGEN.exe' & Enter Registration Name & Paste The HW_ID-Key & Click Generate then Copy Registration_Key
6). Paste 'Registration Name & Key' to 'JAZZ MF927U BY GM SOLUTIONS.exe' & Then Click Register : Password = GM
7). drag 'Unlock.bin' file & drop In the launched window 'Image File Path' section & then click Start Button
8). Edit the file 'CMD.cmd' file & modify the COM-PORT No. to your interface(COMXX) Port, Save, Close & Run it
then Wait for the download progress to Complete.
9). After dont Disconnect Device wait for BATTERY Icon to light Green for atleast 30 Seconds
Then Long press Power Button to boot the Device while connected to USB.
10). When the device has booted successfully disconnect from USB &
Find the RESET BUTTON HOLE & Insert a paperclip into it for 5 seconds Until all icon lights are on then Release button.
********* Device Should now Be Unlocked If all the steps were Successfully followed, Good Luk
NOTE: [ I am Not Responsible if anything happens to your device, so please do this with prior Knowledge.]
YouTube video
*********
1). Download The Files & Extract to PC Some where.
2). Turn On The Device & Install the Driver Files from the Folder.
3). Connect Device Over USB & then Run SCSI.exe App to open ports & Verify that AT Interface(COMXX) & LOG Interface(COMXX)
are Available in Device Manger Under [Ports(COM&LPT): Section].
4). Run 'JAZZ MF927U BY GM SOLUTIONS.exe' & Copy HW_ID-Key "DONT CLOSE WINDOW"
5). Run 'KEYGEN.exe' & Enter Registration Name & Paste The HW_ID-Key & Click Generate then Copy Registration_Key
6). Paste 'Registration Name & Key' to 'JAZZ MF927U BY GM SOLUTIONS.exe' & Then Click Register : Password = GM
7). drag 'Unlock.bin' file & drop In the launched window 'Image File Path' section & then click Start Button
8). Edit the file 'CMD.cmd' file & modify the COM-PORT No. to your interface(COMXX) Port, Save, Close & Run it
then Wait for the download progress to Complete.
9). After dont Disconnect Device wait for BATTERY Icon to light Green for atleast 30 Seconds
Then Long press Power Button to boot the Device while connected to USB.
10). When the device has booted successfully disconnect from USB &
Find the RESET BUTTON HOLE & Insert a paperclip into it for 5 seconds Until all icon lights are on then Release button.
********* Device Should now Be Unlocked If all the steps were Successfully followed, Good Luk